FUEL INJECTION PUMP GROUP (TK486 series, 2200 RPM)
USD 7217.50
Product Details
REF | PART NO. | DESCRIPTION | QTY |
1 | 1010362 | PUMP - fuel injection (2200 rpm) | 1 |
2 | 420100 | * SOLENOID - stop | 1 |
421700 | SOLENOID - stop (SLX & SLXe units only after 10/14, see note) | 1 | |
3 | 332230 | * O-RING - solenoid | 1 |
4 | 558448 | * SCREW - solenoid | 2 |
5 | 130440 | * COVER - governor | 1 |
6 | 335271 | * GASKET - cover | 1 |
7 | 556230 | * PLUG (12 mm) | 2 |
8 | 334169 | * WASHER - sealing (12 mm) | 2 |
9 | 130836 | * LEVER - control | 1 |
10 | 130442TKA | * SPRING - lever | 1 |
11 | 511205 | * NUT - lever | 1 |
12 | 511206 | * NUT - ball joint | 1 |
13 | 116125 | * RETAINER - shaft | 1 |
14 | 555822 | * SCREW - retainer | 1 |
15 | 511207 | * PLUG | 1 |
16 | 334170 | * WASHER - sealing (18 mm) | 3 |
17 | 130444 | * LIFTER | 1 |
18 | 554676 | * O-RING - lifter | 1 |
19 | 555822 | * SCREW - lifter | 1 |
20 | 130445 | * STOPPER | 1 |
21 | 334171 | * O-RING - stopper & eye bolt | 2 |
22 | 130450 | * JOINT - banjo (water) | 1 |
23 | 555846 | * NUT | 1 |
24 | 511155 | * NUT | 1 |
25 | 511154 | * LOCKWASHER | 1 |
26 | 130446 | * JOINT - banjo (fuel in) | 1 |
27 | 130447 | * BOLT - eye | 1 |
28 | 558620 | * WASHER - sealing (12 mm) | 4 |
29 | 334172 | * O-RING - plug | 1 |
30 | 334173TKA | * O-RING - plug | 1 |
31 | 130448 | * JOINT - banjo (fuel out) | 1 |
32 | 130449 | * BOLT - eye | 1 |
33 | 130511 | * PUMP - feed | 1 |
34 | 334193TKA | ** O-RING - inner | 1 |
35 | 334990 | * O-RING - pump | 1 |
36 | 334190TKA | * O-RING - pump | 1 |
37 | 556187 | * SCREW - pump (socket head) | 2 |
38 | 511269 | * SCREW - pump (hex head) | 4 |
39 | 130498 | * CAP - joint, banjo | 1 |
40 | 130513 | * THERMOSTAT | 1 |
41 | 334196 | * O-RING | 1 |
42 | 510612 | * SCREW - idler limit | 1 |
557802 | SCREW - idler limit (genset units) | 1 |
| NOTE: Refer to SB 1008 for new solenoid stop. |
